Simulation Data For Solar Thermal Systems

Information On:

NEW: Computerised Simulation For Solar Thermal Systems

SOLAR ENERGY IRELAND will run a computerized yearly simulation on every solar systems that we sell for our customers for free. With this we can *guarantee the energy product by our system and you know exactly what you are buying.

(*Note: The calculations are made by a computerized simulation programme for solar thermal heating systems. The results are determined by a mathematical model calculation with variable time stages of max. 6 minutes. Actual yields can deviate from these values due to fluctuations in the weather, consumption and other factors.

Get it in writing from your supplier how much energy there systems are producing in your location at your site.

We also can supply this important data (*€150,-) to anyone who would like to see exactly how much energy will be product by our systems or any **other solar thermal system in a year at the installation site. This data is important before you by or install a system for big money. We take into account the exact location, condition at the installation site, system data and weather recordings from the last 20 years and will give information of the energy yield to be produced by the solar thermal system with an accuracy of ± 10%
(*you need to supply the collectors and system data).

For *150€ we also supply this important data to assist engineers, architects, planners and professional solar & water heating specialists in the planning and design of solar thermal heating systems in Ireland and the EU
(*credited to your account and refunded with your order for a solar thermal system).

Simulation data will answer important questions such as.

	What is the optimal collector surface area and tank volume?
	Under what conditions would a given system work more efficiently with evacuated tube collectors rather than flat plate collectors with selective coating?
	What advantages would a two tank system have over a one tank system under varying conditions?
	What temperatures will the hot water tank's) reach in summer?
	How would a change in hot water consumption effect the solar yield?

What type of data would you get?

	Collector surface area irradiation in MWh / kWh/qm.
	Energy produced by collectors in MWh / kWh/qm.
	Domestic hot water energy supply.
	Space heating energy supply.
	Solar contribution to domestic hot water and space heating.
	Fuel savings.
	CO2 emissions avoided.
	Total solar fraction %
	System efficiency %
	Daily maximum collector temperature.
	Detail of systems components.

See below sample data

Part of the data is the systems components.

The system diagram above does not represent and cannot replace a full technical drawing of the solar system).

Warning:

Each system data is different do not use the data below.

Project Data (Sample Only) ©
	Location Weather Data Record: Global Radiation Annual Total: Latitude: Longitude:			Kilkenny South (sunny hill) Kilkenny 970.11 kWh/m² 52 ° 7 °

Basic Data
	Domestic Hot Water
		Daily Consumption: Desired Temp: Load Profile: Cold Water Temperature			200 l/Day 45 °C House (morning max.) February: 10 °C August: 12 °C
	Heating
		Standard Building Heat Flow Requirement: Standard External Temperature: HT Design Temperatures LT Design Temperatures			6 kW -7 °C 70 / 55 °C 30 / 25°C

System Components
	Collector Loop
			Manufacturer: Type: Number: Total Gross Surface Area: Total Active Solar Surface Area: Inclination Azimuth:		SCHÜCO International KG SchücoSol 4.00 10.8 m² 10.04 m² 40 °< 0 °
	Combination Tank (Tank in Tank)
			Manufacturer: Type: Volumetric:		Blomberg Combination Tank ( 800 l) 800L. (550L / 250L)
	Auxiliary Heating
			Manufacturer: Type: Output:		Hyson Oil Boiler ( 33 kW) 33 kW
					© up

Solar Energy Ireland innovative energy systems ..setting new standards in modern heating...and it doesn't cost the earth....

Heating

Collector Loop

Solar Energy Ireland innovative energy systems
..setting new standards in modern heating...and it doesn't cost the earth....